Model 905

Control relay

For magnetic snap-action contacts

Selected documents
Sales contact

WIKA Instruments Philippines Inc.

Tel.:
+63 2 234-1270
Fax:
+63 2 654-9662
sales.ph@wika.com

Applications

  • Amplification of switching current
  • Increasing the lifetime

Special Features

  • 905.12 for 1 contact, output: 1 x SPDT
  • 905.13 for 2 contacts, output: 2 x SPDT
  • 905.14 for 2 contacts, output: 1 x SPDT intermittent, e.g. for pump control
  • Power supply 230Vac - 45.. 60Hz - 2,5VA
  • Electrical rating: 250Vac/8A/1840VA (min. 24Vdc/0,1A)
  • Drop out delay: 500ms
  • Auxiliary output: 24Vdc - 20mA
  • Ambient temperature 0.. +70°C
  • Ingressprotection IP 40 (terminals IP 20)
  • Hat rail mounting

Description

Contact protection relays are used in type 821 contact devices. They increase the switching reliability and switching capacity of electromechanical contact devices and lower their contact voltage. Undesired switching operations of contact devices caused by vibrations are significantly reduced by a drop-out delay of 0.5 sec.

On the side of the contact they operate with a lower control voltage, however, on the output side they can be highly loaded.

Contact protection relays consist of a power supply unit, control unit, switching amplifier and relay output. The contacts are supplied by a control unit with 35 to 40 V clocked DC (i.e. only every hundredth switching occurs under voltage). This enables the optimum contact protection and switching reliability for millions of switching cycles.

Liquid-filled measuring instruments with contacts should be generally used with contact protection relays. The filling increases the service-life of the mechanical measuring system but at the same time it intesifies the burn-up of the contact pins.

Besides the outputs for the contacts there is an additional output for 24 V DC (max. 20 mA). It can be used for example to supply the control LEDs or the transducer.

Observe the safety measures when working with inductive or capacitive loads.

Control relay
  • Control relay
Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.