Thermocouples for temperature measurement up to 1,700 °C

Thermocouples generate a voltage directly dependent on temperature. They are particularly suited for high temperatures up to 1,700 °C. Instrument designs from mineral-insulated sheathed cable are very resistant against extremely high vibration loads (depending on instrument model, sensor element and wetted materials). The accuracy classes 1 and 2 apply for thermocouples in accordance with IEC 60584 as well as the standard and special classes in accordance with ASTM E230.

Sales contact

WIKA Instruments Philippines Inc.

Tel.:
+63 2 234-1270
Fax:
+63 2 654-9662
info.ph@wika.com

FAQ

What are the response times of the various measuring inserts?

The measurement of the response time is carried out in flowing water in accordance with DIN EN 60751 and VDI / VDE 3522.

Ø 6 mm 1xTyp K, ungrounded: t0,5 = 3,3 sec. t0,9 = 7,9 sec.
Ø 6 mm 1xTyp K, grounded: tMore

What measures should be taken with the installation of high-temperature probes with ceramic protection tubes?

Installation and removal should be carried out slowly and gradually, in order to prevent the ceramic protection tube being destroyed by internal thermal stresses.  This must be either preheated or slowly inserted, e.g. 1 ... 2 cm / min for temperatures to 1,60 ... More

Wish list - Documents (0)

There are currently no documents on your wish list. You can add any document from the download area to your wish list. To do this, select the desired language using the flag symbol.

The maximum number of 20 entries was reached.

To receive your download link via e-mail, enter your address here:

The e-mail address is invalid.